Will “Hazardous Waste Management Specialist” be Replaced By Robots? 🤔
1.8% Chance of Automation
“Hazardous Waste Management Specialist” will not be replaced by robots.
This job is ranked #81 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Research, design, plan, or perform engineering duties in the prevention, control, and remediation of environmental hazards using various engineering disciplines. Work may include waste treatment, site remediation, or pollution control technology.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2081.00
- The Mean Annual Wage in the U.S. is $ 88,530.00
- The Mean Hourly Wage is $ 42.00
- Currently, there are 52,280 people on this job
☝️ Information based on the reference occupation “Environmental Engineers”.
Also Known As…
- Environmental Engineers
- Sanitary Engineer
- Regulatory Environmental Compliance Manager
- Marine Engineer CPVEC (Marine Engineer Commercial Passenger Vessel Environmental Compliance)
- Hazardous Substances Engineer
- Global Director Air and Climate Change
- Environmental Remediation Specialist
- Environmental Engineer
- Environmental Analyst
- Chief, Pesticides and Toxic Substances Branch
- Air Pollution Control Engineer
- Water Treatment Plant Engineer
- Water Supply Engineer
- Water Resources Engineer
- Wastewater Treatment Engineer
- Waste Management Engineer
- Solid Waste Management Engineer
- Solid Waste Engineer
- Soil Engineer
- Sewage Disposal Engineer
- Sanitation Engineer
- Reservoir Engineer
- Remediation Project Engineer
- Radiation Protection Engineer
- Public Health Engineer
- Project Manager
- Project Engineer
- Pollution Control Engineer
- Irrigation Engineer
- Industrial Hygiene Engineer
- Hazardous Waste Management Control Engineer
- Flood Control Engineer
- Environmentalist
- Environmental Systems Coordinator
- Environmental Scientist
- Environmental Safety Specialist
- Environmental Remediation Engineer
- Environmental Project Manager
- Environmental Planner
- Environmental Designer
- Environmental Coordinator
- Environmental Consultant
Tasks for “Hazardous Waste Management Specialist”
- Develop site-specific health and safety protocols, such as spill contingency plans or methods for loading or transporting waste.
- Prepare hazardous waste manifests or land disposal restriction notifications.
- Assess, sort, characterize, or pack known or unknown materials.
- Direct installation or operation of environmental monitoring devices or supervise related data collection programs.
- Write reports or articles for Web sites or newsletters related to environmental engineering issues.
- Prepare or present public briefings on the status of environmental engineering projects.
- Inform company employees or other interested parties of environmental issues.
- Monitor progress of environmental improvement programs.
- Provide technical support for environmental remediation or litigation projects, including remediation system design or determination of regulatory applicability.
- Advise industries or government agencies about environmental policies and standards.
- Prepare, review, or update environmental investigation or recommendation reports.
- Serve as liaison with federal, state, or local agencies or officials on issues pertaining to solid or hazardous waste program requirements.
- Request bids from suppliers or consultants.
- Coordinate or manage environmental protection programs or projects, assigning or evaluating work.
- Prepare, maintain, or revise quality assurance documentation or procedures.
- Provide administrative support for projects by collecting data, providing project documentation, training staff, or performing other general administrative duties.
- Design or supervise the design of systems, processes, or equipment for control, management, or remediation of water, air, or soil quality.
- Develop proposed project objectives and targets and report to management on progress in attaining them.
- Develop or present environmental compliance training or orientation sessions.
- Inspect industrial or municipal facilities or programs to evaluate operational effectiveness or ensure compliance with environmental regulations.
- Develop, implement, or manage plans or programs related to conservation or management of natural resources.
- Assist in budget implementation, forecasts, or administration.
- Provide assistance with planning, quality assurance, safety inspection protocols, or sampling as part of a team conducting multimedia inspections at complex facilities.
- Assess the existing or potential environmental impact of land use projects on air, water, or land.
- Obtain, update, or maintain plans, permits, or standard operating procedures.
- Advise corporations or government agencies of procedures to follow in cleaning up contaminated sites to protect people and the environment.
- Provide environmental engineering assistance in network analysis, regulatory analysis, or planning or reviewing database development.
- Collaborate with environmental scientists, planners, hazardous waste technicians, engineers, experts in law or business, or other specialists to address environmental problems.
Related Technology & Tools
- Charge-coupled device CCD cameras
- Respirometers
- Solid shear failure testing devices
- Conductivity meters
- Fume hoods
- Ultraviolet water purification systems
- Total organic carbon TOC analyzers
- Autoclaves
- Stem augers
- Combustible gas meters
- Laboratory ovens
- Pitot tubes
- California bearing ratio CBR testing devices
- Microbics toxicity analyzers
- Organic carbon analyzers
- Whole air canisters
- Capillary electrophoresis systems
- Microwave digestion instruments
- Nitrogen oxide burners
- Flame emission detectors
- Fluorescence detectors
- Colorimeters
- Soil electrical conductivity measurement devices
- Ultraviolet UV light detectors
- Mercury/hybrid atomizers
- Global positioning system GPS receivers
- Particulate filters
- Nutrient analyzers
- Core drill rigs
- Ambient air measurement devices
- Thermocouples
- Limnological core loggers
- Scanning potentiostats
- Stormwater samplers
- Sorbent tubes
- Thermal/catalytic oxidizers TCO
- Plasma-mass spectrometers
- Electron capture detectors ECD
- Incubators
- Electric pumps
- Geoprobes
- Trace metal analyzers
- Desktop computers
- Thermal conductivity detectors
- Supercritical fluid extractors
- Automatic titrators
- Mud rotary drills
- Water level recorders
- Spectrophotometers
- Hydrological current meters
- Argon ionization detectors
- Headspace autosamplers
- Flow meters
- Seismographs
- Individual burner air measurement IBAM probes
- Mass spectrometers
- Shakers
- Sampling trains
- Limnological coring drills
- Chemostats
- Liquid scintillation counters
- Biological oxidizers
- Air incubators
- Liquid chromatography detectors
- Balances
- Centrifuges
- Multi gas detector tubes
- Gas meters
- Photometers
- Air velocity meters
- Sampling pumps
- Soil-erodability testing devices
- Direct shear testing devices
- Gas chromatographs GC
- Dissolved oxygen meters
- Anaerobic growth chambers
- Luminometers
- Glove box systems
- Soil modulus failure testing devices
- Multiparameter water quality instruments
- Consolidometers
- pH meters
- Environmental probe systems
- Sample concentrators
- Flame ionization detectors FID
- Graphite furnaces
- Liquid ring pumps
- Fluorescence spectrophotometers
- Epifluorescence microscopes
- Laser photometers
- Universal fractionators
- Atomic absorption AA spectrometers
- Ozonators
- Soil carbon-nitrogen CN analyzers
- Particle counters
- Atomic absorption AA spectrophotometers
- Freeze dryers
- Ion chromatographs
- Surface area analyzers
- Notebook computers
- Wave gauges
- Interferometeric refractormeters
- Image analysis software
- ESRI ArcView
- Simultaneous location and mapping SLAM
- Bentley Microstation
- Hazardous materials management HMS software
- Microsoft PowerPoint
- Microsoft Office
- Finite element method FEM software
- Simulation software
- C++
- Hydrologic simulation program fortan HSPF software
- SofTech CADRA
- Air dispersion modeling software
- Material safety data sheet MSDS software
- Regulatory compliance management software
- Ecological risk assessment software
- Waste management software
- ANSYS
- Maplesoft Maple
- The MathWorks MATLAB
- Autodesk AutoCAD
- XP Software XPSWMM
- Wind flow modeling software
- Microsoft Access
- Environmental health and safety documentation software
- RockWare MODFLOW
- Oil mapping software
- Continuous emission management software
- Water flow modeling software
- Stormwater runoff modeling software
- SAS
- LINDO
- Fugitive emission leak detection software
- Microsoft Word
- Formula translation/translator FORTRAN
- WAM software
- Photogrammetric software
- Greenhouse gas management software
- DHI Water and Environment MIKE SHE
- Autodesk AutoCAD Civil 3D
- Gas dispersion model software
- Microsoft Project
- Rockwell Automation Arena
- Geomechanical design analysis GDA software
- Insightful S-PLUS
- ESRI ArcGIS software
- Computer aided design CAD software
- Python
- Computer aided design and drafting software CADD
- Microsoft Excel
- HEC RAS
- Site remediation management software