Will “Biomedical Technician” be Replaced By Robots? 🤔
3.7% Chance of Automation
“Biomedical Technician” will not be replaced by robots.
This job is ranked #120 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
Job Details
- The SOC (Standard Occupational Classification) code is 17-2031.00
- The Mean Annual Wage in the U.S. is $ 89,970.00
- The Mean Hourly Wage is $ 43.00
- Currently, there are 20,590 people on this job
☝️ Information based on the reference occupation “Biomedical Engineers”.
Also Known As…
- Biomedical Engineers
- Research Engineer
- Professor
- Clinical Engineer
- Biomedical Manager
- Biomedical Equipment Technician (BMET)
- Biomedical Engineering Technician
- Biomedical Engineering Director
- Biomedical Engineer
- Biomedical Electronics Technician
- Supplier Quality Engineer (SQE)
- Project Engineer
- Product Development Engineer
- Principal Engineer
- Orthopedic Designer
- Nanotechnologist
- Medical Engineer
- Imaging Engineer
- Genetic Engineer
- Field Clinical Engineer
- Dialysis Engineer
- Clinical Engineering Director
- Certified Prosthetist
- Certified Orthotist
- Bioprocess Engineer
- Biomedical Technician
- Biomedical Service Engineer
- Biomedical Scientist
- Biomedical Imaging Center Director
- Biomedical Field Service Engineer
- Biomedical Engineering Technologist
- Biomedical Engineering Supervisor
- Biomedical Analytical Scientist
- Biomechanical Engineer
- Biomaterials Engineer
- Biochemical Engineer
- Bio-Mechanical Engineer
- Associate Professor
- Assistant Professor
Tasks for “Biomedical Technician”
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Teach biomedical engineering or disseminate knowledge about the field through writing or consulting.
- Keep documentation of service histories on all biomedical equipment.
- Adapt or design computer hardware or software for medical science uses.
- Install, adjust, maintain, repair, or provide technical support for biomedical equipment.
- Conduct preventative maintenance on equipment.
- Advise hospital administrators on the planning, acquisition, and use of medical equipment.
- Analyze new medical procedures to forecast likely outcomes.
- Research new materials to be used for products, such as implanted artificial organs.
- Write documents describing protocols, policies, standards for use, maintenance, and repair of medical equipment.
- Diagnose and interpret bioelectric data, using signal processing techniques.
- Advise and assist in the application of instrumentation in clinical environments.
- Manage teams of engineers by creating schedules, tracking inventory, creating and using budgets, and overseeing contract obligations and deadlines.
- Design and develop medical diagnostic and clinical instrumentation, equipment, and procedures, using the principles of engineering and biobehavioral sciences.
- Conduct research, along with life scientists, chemists, and medical scientists, on the engineering aspects of the biological systems of humans and animals.
- Develop models or computer simulations of human biobehavioral systems to obtain data for measuring or controlling life processes.
- Conduct training or in-services to educate clinicians and other personnel on proper use of equipment.
- Design and deliver technology to assist people with disabilities.
- Develop new applications for energy sources, such as using nuclear power for biomedical implants.
Related Technology & Tools
- Skinfold calipers
- Fluorescence microscopes
- Axial-torsional testing systems
- Optical particle detectors
- Polygraph recorders
- Spectrofluorimeters
- Biosafety cabinets
- Posturographic measurement systems
- Footswitch sensors
- Pacemaker analyzers
- X ray lithography equipment
- Plastic injection molding machines
- Motion actuators
- Incubator performance analyzers
- Optical tomographic imaging scanners
- Ultrasound imaging scanners
- Prosthetic limb testers
- Grass stimulators
- Desktop computers
- Biomagnetic imaging scanners
- Ultrasound wattmeters
- Electrosurgery testing devices
- Microvalves
- Optical coherence tomography OCT scanners
- Servopneumatic axial test instruments
- Ventilator performance analyzers
- Maskless photolithography equipment
- Biomedical device electrical safety testers
- Ultrasonic testing apparatus
- Pressure transducers
- Micropumps
- Polymer matrices
- Multi-photon microscopes
- Incubators
- Strain gauges
- Isolators
- Ultrasound transducers
- Piezoelectric ceramic transducers
- Rapid toxicity testing systems
- Magnetic resonance imaging MRI systems
- Grip dynamometers
- Digital sonomicrometers
- Medical radiation dosimeters
- Load sensors
- Bio-signal simulators
- Sterilization-in-place equipment
- Ultrasound indention probes
- Optical traps
- Two-point discriminators
- Microelectrodes
- Circuit analyzers
- Acoustic measurement systems
- Polymer scaffolds
- Material tension/compression testing devices
- Positron emission tomography PET scanners
- Electroplating apparatus
- Milling machines
- Anthropometers
- Servopneumatic actuators
- Electroencephalography EEG equipment
- Opto-electronic electrogoniometers
- Biomimetic robots
- Pressure and temperature measurement devices
- Polymerase chain reaction PCR equipment
- Fourier transform infrared FTIR spectrometers
- Ultra high speed magnetic resonance imaging MRI scanner machines
- Pulsating bubble surfactometers PBS
- Cardiovascular prosthetic device testers
- Eye tracking devices
- Spinal disk implant wear testers
- High-speed digital cameras
- Electromyographs EMG
- Single photon emission computed tomography SPECT scanners
- Micromanipulation microrheology microscopes
- Torsiometers
- Microfluidic networks
- Pacemaker testing devices
- Micromolding lithography equipment
- Environmental conditions measurement devices
- Molecular vacuum pumps
- Impact testers
- Acousto-optic modulators
- Activity monitoring devices
- Bio-signal amplifiers
- Microcontrollers
- Non-invasive blood pressure monitor analyzers
- Microplating equipment
- Microplate readers
- Basic stamp microcontrollers
- Material fatigue and dynamics characterization devices
- Radiation compliance testing devices
- Accelerometers
- Multi-axis kinematic knee simulators
- Arbitrary waveform generators
- Frequency shifters
- Functional magnetic resonance imaging fMRI scanners
- Hardness testing devices
- Bioreactors
- Microplate washers
- 3T scanners
- Dissolved oxygen polarographic measurement devices
- Oscilloscopes
- Laser ablation machines
- Bio-sensors
- Flow control devices
- Defibrillator testing devices
- Spirometers
- Patient monitoring testing devices
- X ray machines
- Strain gauge conditioners
- Soft materials in-vitro simulation system
- Pinch gauges
- Electrical particle detectors
- Electrode pullers
- Pressure sensors
- Endovascular stent-graft testing instruments
- Intravenous IV pump analyzers
- Electrode bevelers
- Pulse oximeters
- Sublimation printers
- Finger joint flexure testers
- Force platforms
- Superconducting quantum interference devices SQUID
- Spine simulators
- Cone-plate viscometers
- Dynamometers
- Piezoelectric sensors
- Laptop computers
- Insole sensors
- Gas flow control systems
- Bacteria-based biosensors
- Immuno-sensors
- Centrifuges
- Radio frequency amplifiers
- Deflectors
- Plasma excitation chambers
- Multimeters
- Molecular cytosensors
- Quantum-based switching applications Q-switch electron waveguides
- Physical conditioning treadmill exercisers
- Glass micromolds
- Scanning probe microscopes SPM
- IBM Rational ClearQuest
- Minitab
- ANSYS
- Materials testing software
- Microsoft Excel
- Instrument control software
- Image analysis software
- Circuit simulation software
- Wolfram Research Mathematica
- Electronic design automation EDA software
- Fault modeling software
- Finite element method FEM software
- SNOINO RCM Pro
- Zuken
- Diagramming software
- Hierarchical simulation program with integrated circuit emphasis HSPICE
- SNOINO Ttree
- Medical imaging software
- Stratasys FDM MedModeler
- Neural network modeling software
- Medical information software
- SAP BusinessObjects Crystal Reports
- Dassault Systems SOLIDWORKS
- Computer aided manufacturing CAM software
- PTC Pro/ENGINEER Wildfire
- Fault tree analysis FTA software
- Defect tracking software
- Laboratory information management system LIMS
- Computer aided design CAD software
- Mathsoft Mathcad
- Microsoft Visual Basic
- System testing software
- Microsoft Project
- IBM Rational ClearCase
- Unified modeling language UML
- Project estimation software
- Numerical analysis software
- Gait analysis software
- Rapid prototyping software
- Virtual instrument software
- National Instruments LabVIEW
- C++
- Calibration software
- Computational modeling software
- Technis BETAPLUS
- IBM Rational RequisitePro
- Advanced computer simulation language ACSL
- Requirements management software
- Force platform software
- Extensible markup language XML
- Molecular simulation software
- Human modeling software
- Microsoft PowerPoint
- Reliability centered maintenance RCM software
- C
- Electromyograph analysis software
- Failure rate data in perspective FARADIP software
- Stochastic modeling software
- Instrument validation software
- Systems analysis programs for hands on integrated reliability evaluation software SAPHIRE
- Three-dimensional motion capture software
- Test automation software
- Failure rate database software
- ERP software
- Mentor Graphics
- Charting software
- Motion analysis software
- Calculating optimum maintenance parameters COMPARE
- Equipment compliance testing software
- Schematic design entry software
- Fourier transform infrared FTIR software
- Microsoft Office
- Rapid application development RAD software
- Electromechanical testing analysis software
- Hypertext markup language HTML
- The MathWorks MATLAB
- R
- OrCAD Capture
- Criticality analysis software
- Dyadem FMEA Pro-6
- Mean time between failures MBTF software
- Root cause analysis software
- Microsoft Word
- Biomechanical modeling software
- Cadence Encounter Test
- Common cause failure assessment software
- Preventive maintenance software
- Cadence Allegro Design Entry Capture and Capture CIS
- Verilog
- Simulation program with integrated circuit emphasis SPICE
- JavaScript
- Failure mode and effects analysis FMEA software
- Computational fluid dynamics CFD software
- Functional modeling software
- Force sensitive applications FSA software
- Embedded systems testing software
- Hardware description language HDL