Will “Lever Tender” be Replaced By Robots? 🤔

93% Chance of Automation

“Lever Tender” will almost certainly be replaced by robots.

This job is ranked #587 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.

Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍

Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.

☝️ Information based on the reference occupation “Forging Machine Setters, Operators, and Tenders, Metal and Plastic”.

Read work orders or blueprints to determine specified tolerances and sequences of operations for machine setup.
Trim and compress finished forgings to specified tolerances.
Repair, maintain, and replace parts on dies.
Set up, operate, or tend presses and forging machines to perform hot or cold forging by flattening, straightening, bending, cutting, piercing, or other operations to taper, shape, or form metal.
Measure and inspect machined parts to ensure conformance to product specifications.
Install, adjust, and remove dies, synchronizing cams, forging hammers, and stop guides, using overhead cranes or other hoisting devices, and hand tools.
Position and move metal wires or workpieces through a series of dies that compress and shape stock to form die impressions.
Select, align, and bolt positioning fixtures, stops and specified dies to rams and anvils, forging rolls, or presses and hammers.
Sharpen cutting tools and drill bits, using bench grinders.
Start machines to produce sample workpieces, and observe operations to detect machine malfunctions and to verify that machine setups conform to specifications.
Turn handles or knobs to set pressures and depths of ram strokes and to synchronize machine operations.
Remove dies from machines when production runs are finished.
Confer with other workers about machine setups and operational specifications.