Will “Heavy Machinery Operator” be Replaced By Robots? 🤔
59% Chance of Automation
“Heavy Machinery Operator” will maybe be replaced by robots.
This job is ranked #327 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate machinery such as longwall shears, plows, and cutting machines to cut or channel along the face or seams of coal mines, stone quarries, or other mining surfaces to facilitate blasting, separating, or removing minerals or materials from mines or from the Earth's surface. Includes shale planers.
Job Details
- The SOC (Standard Occupational Classification) code is 47-5042.00
- The Mean Annual Wage in the U.S. is $ 50,670.00
- The Mean Hourly Wage is $ 24.00
- Currently, there are 5,930 people on this job
☝️ Information based on the reference occupation “Mine Cutting and Channeling Machine Operators”.
Also Known As…
- Mine Cutting and Channeling Machine Operators
- Underground Miner
- Underground Heavy Equipment Operator
- Shearer Operator
- Shear Operator
- Miner Operator
- Longwall Shearer Operator
- Coal Miner
- Bore Miner Operator
- Underground Foreman
- Under Cutter
- Surface Miner
- Shale Planer Operator
- Shale Miner
- Remote Continuous Mining Machine Operator
- Quarry Equipment Operator
- Plane Tender
- Plane Runner
- Mine Cutting and Channeling Machine Operator
- Mine Cutting and Channeling Machine Copper Miner
- Mine Cutting and Channeling Machine Company Miner
- Mine Cutting and Channeling Machine Coal Miner
- Mine Cutting and Channeling Machine Clay Miner
- Machine Driller
- Machine Cutter
- Longwall Foreman
- Long Wall Shear Operator
- Long Wall Mining Machine Tender
- Flame Channeler
- Drilling Machine Operator
- Dozer Operator
- Cutter Operator
- Cutter
- Continuous Miner Operator (CMO)
- Coal Cutter
- Clay Miner
- Clay Mine Cutting Machine Operator
- Channeling Machine Runner
- Channeler Runner
- Channel Machine Operator
Tasks for “Heavy Machinery Operator”
- Guide and assist crews in laying track for machines and resetting planer rails, supports, and blocking, using jacks, shovels, sledges, picks, and pinch bars.
- Remove debris such as loose shale from channels and planer travel areas.
- Free jams in planer hoppers, using metal pinch bars.
- Press buttons to activate conveyor belts, and push or pull chain handles to regulate conveyor movement so that material can be moved or loaded into dinkey cars or dump trucks.
- Signal truck drivers to position their vehicles for receiving shale from planer hoppers.
- Determine locations, boundaries, and depths of holes or channels to be cut.
- Observe indicator lights and gauges, and listen to machine operation to detect binding or stoppage of tools or other equipment problems.
- Charge and set off explosives in blasting holes.
- Signal that machine plow blades are properly positioned, using electronic buzzers or two-way radios.
- Signal crew members to adjust the speed of equipment to the rate of installation of roof supports, and to adjust the speed of conveyors to the volume of coal.
- Move controls to start and position drill cutters or torches and advance tools into mines or quarry faces to complete horizontal or vertical cuts.
- Monitor movement of shale along conveyors from hoppers to trucks or railcars.
- Move planer levers to control and adjust the movement of equipment, the speed, height, and depth of cuts, and to rotate swivel cutting booms.
- Drive mobile, truck-mounted, or track-mounted drilling or cutting machine in mines and quarries or on construction sites.
- Reposition machines and move controls to make additional holes or cuts.
- Advance plow blades through coal strata by remote control, according to electronic or radio signals from the tailer.
- Cut and move shale from open pits.
- Replace worn or broken tools and machine bits and parts, using wrenches, pry bars, and other hand tools, and lubricate machines, using grease guns.
- Cut slots along working faces of coal, salt, or other non-metal deposits to facilitate blasting, by moving levers to start the machine, and to control the vertical reciprocating drills.
- Cut entries between rooms and haulage ways.
- Position jacks, timbers, or roof supports, and install casings, to prevent cave-ins.
Related Technology & Tools
- Burning bars
- Integrated air velocity monitors
- Atmospheric monitors
- Tunneling machines
- Ultrasonic anemometers
- Armored face conveyors
- Channeling machines
- Tractor drills
- Roadheaders
- Miner's helmets
- Cutting torches
- Protective goggles
- Shuttle cars
- Heavy dump trucks
- Pry bars
- Scissor bolters
- Adjustable combination wrenches
- Cone crushing equipment
- Pinch bars
- Personal computers
- Detonation units
- Mining picks
- Mining shovels
- Mobile radios
- Cutting machines
- Methane monitors
- Jaw crushing equipment
- Rock drilling machines
- Lube guns
- Mining bulldozers
- Crowbars
- Portable hand grinders
- Raise bores
- Self-rescuers
- Continuous miners
- Mine conveyor belts
- Electric chainsaws
- Jackhammers
- Power shovels
- Grinding mills
- Longwall shears
- Hydraulic jacks
- Protective ear muffs
- Screw jacks
- National Institute for Occupational Safety and Health Analysis of Longwall Pillar Stability ALPS
- Joy Mining Machinery JOY FACEBOSS
- Microsoft Excel
- National Institute for Occupational Safety and Health Analysis of Roof Bolt Systems ARBS