Will “Diamond Driller” be Replaced By Robots? 🤔
85% Chance of Automation
“Diamond Driller” will probably be replaced by robots.
This job is ranked #488 out of #702. A higher ranking (i.e., a lower number) means the job is less likely to be replaced.
Care to share? Click for Facebook, Twitter, LinkedIn, or XING. 👍
Job Description
Operate a variety of drills such as rotary, churn, and pneumatic to tap sub-surface water and salt deposits, to remove core samples during mineral exploration or soil testing, and to facilitate the use of explosives in mining or construction. May use explosives. Includes horizontal and earth boring machine operators.
Job Details
- The SOC (Standard Occupational Classification) code is 47-5021.00
- The Mean Annual Wage in the U.S. is $ 51,240.00
- The Mean Hourly Wage is $ 24.00
- Currently, there are 18,500 people on this job
☝️ Information based on the reference occupation “Earth Drillers, Except Oil and Gas”.
Also Known As…
- Earth Drillers, Except Oil and Gas
- Well Driller
- Rock Drill Operator
- Overburden Drill Operator
- Highwall Drill Operator
- Hard Rock Drill Operator
- Driller
- Drill Operator
- Blasting Production Technician
- Blaster
- Blast Hole Driller
- Well Testing Operator
- Well Driller Helper
- Well Drill Operator
- Well Digger
- Water Well Driller
- Wash Driller
- Wagoner
- Wagon Driller
- Wagon Drill Operator
- Tunneling Machine Operator
- Test Driller
- Test Borer
- Stoper
- Soil Sampler
- Shot Core Drill Operator
- Raise Driller
- Post Hole Digging Machine Operator
- Post Hole Digger
- Operating Engineer
- Mine Equipment Operator
- Machine Driller
- Jumper
- Hydraulic Rock Drill Operator
- Horizontal Earth Boring Machine Operator
- Horizontal Drill Operator
- Hole Digger Operator
- Heavy Equipment Operator
- Ground Water Contractor
- Geothermal Operating Engineer
- Geotechnical Operating Engineer
- Foundation Drill Operator
- Explosive Bore Hole Driller
- Environmental Sampler
- Electric Drill Operator
- Earth Boring Machine Operator
- Earth Auger Operator
- Drilling Machine Runner
- Drilling Machine Operator
- Drill Runner
- Drill Hand
- Directional Driller
- Deep Well Contractor
- Core Sampler
- Core Driller
- Core Drill Operator
- Construction Driller
- Coal Mine Bore Hole Drill Operator
- Churn Driller
- Churn Drill Operator
- Boring Machine Operator
- Auger Operator
Tasks for “Diamond Driller”
- Inspect core samples to determine nature of strata, or take samples to laboratories for analysis.
- Record drilling progress and geological data.
- Disinfect, reconstruct, and redevelop contaminated wells and water pumping systems, and clean and disinfect new wells in preparation for use.
- Operate water-well drilling rigs and other equipment to drill, bore, and dig for water wells or for environmental assessment purposes.
- Design well pumping systems.
- Operate controls to stabilize machines and to position and align drills.
- Assemble and position machines, augers, casing pipes, and other equipment, using hand and power tools.
- Pour water into wells, or pump water or slush into wells to cool drill bits and to remove drillings.
- Drive trucks, tractors, or truck-mounted drills to and from work sites.
- Fabricate well casings.
- Retrieve lost equipment from bore holes, using retrieval tools and equipment.
- Perform pumping tests to assess well performance.
- Verify depths and alignments of boring positions.
- Perform routine maintenance and upgrade work on machines and equipment, such as replacing parts, building up drill bits, and lubricating machinery.
- Operate hoists to lift power line poles into position.
- Observe electronic graph recorders and flow meters that monitor the water used to flush debris from holes.
- Signal crane operators to move equipment.
- Withdraw drill rods from holes, and extract core samples.
- Review client requirements and proposed locations for drilling operations to determine feasibility, and to determine cost estimates.
- Start, stop, and control drilling speed of machines and insertion of casings into holes.
- Drive or guide truck-mounted equipment into position, level and stabilize rigs, and extend telescoping derricks.
- Retract augers to force discharge dirt from holes.
- Select the appropriate drill for the job, using knowledge of rock or soil conditions.
- Monitor drilling operations, checking gauges and listening to equipment to assess drilling conditions and to determine the need to adjust drilling or alter equipment.
- Select and attach drill bits and drill rods, adding more rods as hole depths increase, and changing drill bits as needed.
- Document geological formations encountered during work.
- Place and install screens, casings, pumps, and other well fixtures to develop wells.
- Operate machines to flush earth cuttings or to blow dust from holes.
- Drill or bore holes in rock for blasting, grouting, anchoring, or building foundations.
- Regulate air pressure, rotary speed, and downward pressure, according to the type of rock or concrete being drilled.
Related Technology & Tools
- Pipe retrieval fishing tools
- Power augers
- Truck mounted cranes
- Mud pumping equipment
- Submerged arc welding tools
- Drill pipe tongs
- Water sampling bailers
- Shale shakers
- Air rotary drills
- Earth drilling machines
- Personal computers
- Core drill rigs
- Alternating current AC generators
- Precision levels
- Handheld remote thermometers
- Water monitoring samplers
- Laptop computers
- Chain slings
- Downhole well testing equipment
- Grout pumps
- Mud guns
- Marsh funnels
- Global positioning system GPS receivers
- Water test kits
- Lube guns
- Downhole hammers
- Mud mixers
- Backhoe-equipped tractors
- Desanders
- Bobcats
- Drilling collars
- Adjustable combination wrenches
- Mud balances
- Work trucks
- Tablet computers
- Water level meters
- Portable air compressors
- Cable tool drills
- Rotary drilling tools
- Field forklifts
- Mud rotary drills
- Water logging tools
- Truck-mounted water pumps
- Digital video cameras
- Trenchers
- Data entry software
- Microsoft Word
- Microsoft Excel
- Microsoft Office
- Global positioning system GPS software